END OF SUMMER SALE15% OFFENDS 27 SEPTEMBER
Fuku Off-Road
Roof-Mounted Limb Riser Mount (with Linkage Mechanism)
Roof-Mounted Limb Riser Mount (with Linkage Mechanism) installed on Ford Bronco — on vehicle
Roof-Mounted Limb Riser Mount (with Linkage Mechanism) installed on Ford Bronco — on vehicle
Roof-Mounted Limb Riser Mount (with Linkage Mechanism) installed on Ford Bronco — on vehicle
Roof-Mounted Limb Riser Mount (with Linkage Mechanism) installed on Ford Bronco — on vehicle
Roof-Mounted Limb Riser Mount (with Linkage Mechanism) installed on Ford Bronco — on vehicle
Roof-Mounted Limb Riser Mount (with Linkage Mechanism)
Roof-Mounted Limb Riser Mount (with Linkage Mechanism)
Roof-Mounted Limb Riser Mount (with Linkage Mechanism)
Roof-Mounted Limb Riser Mount (with Linkage Mechanism)
Roof-Mounted Limb Riser Mount (with Linkage Mechanism)
Roof-Mounted Limb Riser Mount (with Linkage Mechanism)
+4

PRODUCT DETAILS

Send branches over your windshield instead of down it. Limb risers are two tensioned lines that run from the front corners of your hood up to the roof. On a tight trail they catch branches and lift them up and over the windshield instead of letting them slap the glass, the mirrors and the paint. This is the roof-end kit: two roof bases and their cover plates, two linkage mechanisms, two limb-riser lines, a quick-release GoPro mount and the screws.
The linkage releases the line tension with one push, which fixes the thing that makes most riser setups annoying - having to untie everything before you can open the hood. A camera mount is built into the top face, so a camera rides at the highest point on the truck with a clear forward view; it takes the standard two-prong GoPro fitting.
It bolts to the factory roof mounting points with nothing cut, machined from 6061-T6 aluminium, a heat-treated alloy. It is made for hunters and trail drivers who push through dense growth and want their glass and paint protected.
What you still need, and what you do not. These lines anchor at the roof here and at the front on our Hood-Mounted Limb Riser Handle, sold separately - check what is already on your hood before you order. You do not also need the standalone Linkage Mechanism (with Limb Riser); two of them are already in this box. And if you want a light bar on the same roof platform, buy the Adjustable Roof Spotlight Bracket 40-52 in instead of this - it does the same limb-riser job and carries the bar. One caveat we cannot answer from the factory sheet: whether the hardtop panels still lift out with this fitted. If you run the removable top, email hello@fukuoffroad.com before ordering.

Factory-point mount

Uses the original roof locations, nothing cut or drilled.

6061-T6 alloy

Machined aluminium with a sprayed coating. Each roof base 76 x 125 x 52 mm (3.0 x 4.9 x 2.0 in); 1.95 kg (4.3 lb) for the kit.

One-push slack

Drop the line tension in one press and open the hood; press again to re-tension.

In the box

Two roof bases and cover plates, two linkage mechanisms, two limb-riser lines, a quick-release GoPro mount and the screws.

Fits Bronco 2021-2025 (2.3 / 2.7 / 3.0)

Armed Black or Vintage White. Shipped to the US and Canada with duties and import fees already paid, so there is no customs bill when it lands (that is what DDP means). Delivery is typically 2-4 weeks.

Complete the Install

Roof-Mounted Limb Riser MountThis item
Roof-Mounted Limb Riser Mount
$246.00
Hood-Mounted Limb Riser Handle
Hood-Mounted Limb Riser Handle
$346.00
Limb Riser Linkage Mechanism
Limb Riser Linkage Mechanism
$162.00
Quick-Release Blind Spot Sand Plate Mirror
Quick-Release Blind Spot Sand Plate Mirror
$226.00
Bundle total · 4 items
$980.00
◆

Ships US & Canada

Duties included · delivery 2–4 weeks

◆

Fitment Guaranteed

Vehicle-specific, confirmed parts

◆

1-Year Warranty

Covered against defects for 1 year

◆

Easy Returns

14-day, uncrated & in packaging

In use

One mount, every way you run the truck.

A limb riser is only as good as its top anchor, and a line that lets go up there drops straight across the windscreen. This frame is that end: the cable pinned at the top corner, safety lanyard behind it.

A limb riser is only as good as its top anchor, and a line that lets go up there drops straight across the windscreen. This frame is that end: the cable pinned at the top corner, safety lanyard behind it.

Before / after

The same truck, ten minutes apart.

BeforeBare cab corner. A limb riser is only as good as whatever holds its top end.
AfterThat top end, anchored to the roof. The hood still opens with the lines on.

Bare cab corner. A limb riser is only as good as whatever holds its top end.

That top end, anchored to the roof. The hood still opens with the lines on.

Mechanism

Every claim, and the reason it is true.

Claim

The hood still opens with the lines fitted.

Mechanism

One press releases tension at the roof end, so the lines slacken instead of being untied. Anchor points and line length stay set.

Claim

A camera sits at the highest point on the truck with a clear forward view.

Mechanism

The mount is on the top face of the roof bases rather than the bonnet or bar, so nothing on the vehicle is in front of it. It takes the standard two-prong GoPro fitting, so existing mounts transfer.

Claim

The roof comes back to standard.

Mechanism

It uses the original roof-rack points, cut to the Bronco roof from factory data. Nothing is drilled, so removing it leaves the same holes the truck shipped with.

Detail

Where the cost went.

The roof base
The roof baseThe machined roof base and the cover plate that closes it.
The release
The releaseThe one-press release on the linkage body.
The camera mount
The camera mountThe camera mount cut into the top face.

In the box

Everything, and what each piece is for.

Roof mounting bases x2 and cover plates x2Factory roof mounting points · The roof-end anchor for the limb-riser lines.
Linkage mechanisms x2On the roof bases · Hold and release the line tension in one press.
Limb-riser lines x2, 1485 mm (58.5 in)Hood corner to roof · The lines themselves. Included with this kit.
Quick-release GoPro mount x1Top face of the mount · Takes the standard two-prong GoPro fitting.
M6x30 x2, M6x18 x4, M6x14 flat head x4At the factory points · Fasten the bases. No drilling.
Hood-end anchorNot included · Sold separately: the Hood-Mounted Limb Riser Handle.
4.9 in
125 mm
Length
3.0 in
76 mm
Width
2.0 in
52 mm
Height
4.3 lb
1.95 kg
Net weight

Confirmed Fitment

  • Ford Bronco 2021–2025 2/4-Door
  • Ford Bronco Raptor 2022–2025 4-Door

How it compares

One-push hood slack and a camera mount that cable kits skip Fuku

Steel and stainless cable kits protect the windshield too. Only Fuku adds a one-press line slack for hood access, a built-in camera mount, and a machined 6061-T6 base.

FUKU
Steel cable limb-riser kit
One-press line slack for hood access
✓
✕
Built-in camera mount, GoPro fitting included
✓
✕
Machined 6061-T6 aluminium base
✓
✕

◆ SUPPORT

Frequently asked questions

FITMENT

Every product lists the exact platforms it fits under “Fits” and in the Specs tab. Use Shop by Vehicle to filter to your rig.

Fitment is listed per product; most parts cover both 2- and 4-door and all trims unless noted otherwise.

Check the Fitment line on the product page for engine/trim coverage, or contact us with your year, model, and trim.

INSTALLATION

Most parts are no-drill and use factory mounting points; any exceptions are noted on the product page.

Basic hand tools cover most installs. Product pages and guides list exactly what you need.

Typical installs run 30–90 minutes depending on the part.

SHIPPING & RETURNS

Most orders dispatch within 2–4 business days. Oversized items (racks, ladders) may ship freight.

Yes — we ship across the US and Canada. All orders are DDP, so duties and import fees are covered at checkout.

Unused items in original packaging can be returned within 14 days of delivery. Change-of-mind returns pay return shipping and a 15% restocking fee; defective and warranty returns pay neither.

WARRANTY

A 1-year limited warranty covers defects in materials and workmanship under normal use.

Contact us with your order number and photos of the issue and we’ll take it from there.

Finish failure under normal use is covered for 1 year; normal wear is not.

End of summer sale

15% OFF

Use code SUMMER15 at checkout for 15% off.

SUMMER15

Applied at checkout when you enter the code. Ends 27 September. Cannot be combined with other discount codes.