PRODUCT DETAILS
Special edition (NEPT Wasteland)
Bolts to the factory mounting points on the back of the tailgate. 6061-T6 aluminum, 450 × 236 × 130 mm length × width × height (17.7 × 9.3 × 5.1 in), 2.4 kg (5.3 lb). Armed Black or Armed Silver. Our tailgate limiter is in the box.
Carbon Fiber edition (NEPT Hunting)
Clamps to the factory tailgate hinge on two reinforced bases. 6061-T6 aluminum with a carbon fiber accent — a surface finish over the alloy, not a structural layer. 464.5 × 136.5 × 92.5 mm length × width × height (18.3 × 5.4 × 3.6 in), 2.15 kg (4.7 lb). Armed Black or Vintage White.
Flagpole, antenna and shovel not included
The hub is what you're buying, on either edition. On the Carbon Fiber edition the flagpole and shovel ports are a standard 28 mm (1.1 in), so most off-the-shelf poles and shovels drop straight in. We do not publish port sizes for the Special edition, or for the antenna position on either — email hello@fukuoffroad.com with your gear before you order.
No-drill install
Four M8x40 hex socket screws into factory locations on either edition. Nothing is cut or drilled, and it comes off again without leaving a mark on the bodywork.
Sliding base
Both editions shift left or right to clear an oversized spare, with the tailgate still swinging fully open. We have not published the travel, so tell us your spare and we'll check it for you.
Fits 2021–2025 Bronco, 2- and 4-door, 2.3 / 2.7 / 3.0
not Bronco Sport. DDP (Delivered Duty Paid) to the US & Canada, so nothing is owed on delivery. Delivery is typically 2–4 weeks. Confirm trim with us if you run the 3.0 Raptor.
Complete the Install
This item
Ships US & Canada
Duties included · delivery 2–4 weeks
Fitment Guaranteed
Vehicle-specific, confirmed parts
1-Year Warranty
Covered against defects for 1 year
Easy Returns
14-day, uncrated & in packaging
In use
One mount, every way you run the truck.
Parked in a group on open ground, your truck is one dark shape among several. This mount carries a pole off the back of the tailgate that puts a flag clear above the roof. Flag and pole are not included.
Before / after
The same truck, ten minutes apart.
Bare tailgate. A flag, an antenna and a shovel each want their own bracket, in the same spot.
One mount holds all three, on points the tailgate already has.
Mechanism
Every claim, and the reason it is true.
Claim
One hub carries the flag, the antenna and the shovel.
Mechanism
On both editions every port is machined into a single body, so there is one set of fasteners into the truck instead of three separate brackets.
Claim
It slides clear of an oversized spare.
Mechanism
On both editions the base slides left and right along its mounting, so a big tire never forces a choice between the mount and a gate that opens.
Claim
Bolts on. No cutting, no drilling.
Mechanism
Four M8x40 screws into factory locations — the back of the tailgate on the Special edition, the factory tailgate hinge on the Carbon Fiber. Run it for a weekend rally, take it off clean, and the truck is back to stock.
Detail
Where the cost went.
In the box
Everything, and what each piece is for.
Confirmed Fitment
- Ford Bronco 2021–2025 2/4-Door
- Ford Bronco Raptor 2022–2025 4-Door
Comparison
How Fuku stacks up
Most flag mounts for a Bronco hold a pole and nothing else, and they leave the tailgate swinging into the tail lights for you to solve on your own. Either edition here takes three items on one hub, on a base that slides clear of an oversized spare — and the Special edition ships with the limiter that stops the gate.
◆ SUPPORT
Frequently asked questions
FITMENT
Every product lists the exact platforms it fits under “Fits” and in the Specs tab. Use Shop by Vehicle to filter to your rig.
Fitment is listed per product; most parts cover both 2- and 4-door and all trims unless noted otherwise.
Check the Fitment line on the product page for engine/trim coverage, or contact us with your year, model, and trim.
INSTALLATION
Most parts are no-drill and use factory mounting points; any exceptions are noted on the product page.
Basic hand tools cover most installs. Product pages and guides list exactly what you need.
Typical installs run 30–90 minutes depending on the part.
SHIPPING & RETURNS
Most orders dispatch within 2–4 business days. Oversized items (racks, ladders) may ship freight.
Yes — we ship across the US and Canada. All orders are DDP, so duties and import fees are covered at checkout.
Unused items in original packaging can be returned within 14 days of delivery. Change-of-mind returns pay return shipping and a 15% restocking fee; defective and warranty returns pay neither.
WARRANTY
A 1-year limited warranty covers defects in materials and workmanship under normal use.
Contact us with your order number and photos of the issue and we’ll take it from there.
Finish failure under normal use is covered for 1 year; normal wear is not.
End of summer sale
15% OFF
Use code SUMMER15 at checkout for 15% off.
Applied at checkout when you enter the code. Ends 27 September. Cannot be combined with other discount codes.