END OF SUMMER SALE15% OFFENDS 27 SEPTEMBER
Fuku Off-Road
Adjustable Roof Spotlight Bracket 40-52 Inches (with Limb Riser & Linkage Mechanism)
Adjustable Roof Spotlight Bracket 40-52 Inches installed on Ford Bronco — on vehicle
Adjustable Roof Spotlight Bracket 40-52 Inches installed on Ford Bronco — on vehicle
Adjustable Roof Spotlight Bracket 40-52 Inches installed on Ford Bronco — on vehicle
Adjustable Roof Spotlight Bracket 40-52 Inches installed on Ford Bronco — on vehicle
Adjustable Roof Spotlight Bracket 40-52 Inches installed on Ford Bronco — on vehicle
Adjustable Roof Spotlight Bracket 40-52 Inches (with Limb Riser & Linkage Mechanism)
Adjustable Roof Spotlight Bracket 40-52 Inches (with Limb Riser & Linkage Mechanism)
Adjustable Roof Spotlight Bracket 40-52 Inches (with Limb Riser & Linkage Mechanism)
Adjustable Roof Spotlight Bracket 40-52 Inches (with Limb Riser & Linkage Mechanism)
Adjustable Roof Spotlight Bracket 40-52 Inches (with Limb Riser & Linkage Mechanism)
Adjustable Roof Spotlight Bracket 40-52 Inches (with Limb Riser & Linkage Mechanism)
+4

PRODUCT DETAILS

Run your light bar and your limb risers off one roof platform. The light bar is not included - this NEPT Hunting bracket is the mounting hardware. The rails adjust across a 1110-1343 mm mounting span, which covers light bars from 40 to 52 inches long. Those are two different measurements: the span is the distance between the mounting feet, the inches are the length of the bar.
The sliding rails detach individually, which is what makes a width change a five-minute job rather than a rebuild. The bracket also carries a limb riser. Limb risers are two tensioned lines that run from the front corners of your hood up to the roof. On a tight trail they catch branches and lift them up and over the windshield instead of letting them slap the glass, the mirrors and the paint.
The linkage releases that line tension in one press, so you can still open the hood without untying anything. Machined from 6061-T6 aluminium - a heat-treated alloy - and finished in a sprayed Armed Black coating, it fits the original roof-rack mounting points without drilling and weighs 3.3 kg (7.3 lb).
Before you order. The light bar is a separate purchase, and we do not publish a bolt pattern or foot spacing - measure your bar’s mounting feet against the 1110-1343 mm span, or email hello@fukuoffroad.com with the model and we will check. The limb-riser lines anchor at the hood on our Hood-Mounted Limb Riser Handle, sold separately. You do not also need the Roof-Mounted Limb Riser Mount or the standalone Linkage Mechanism (with Limb Riser): this bracket already carries two linkages and two lines.

No-drill install

Original roof-rack mounting points, sheet metal untouched.

6061-T6 alloy

Machined aluminium in a sprayed Armed Black coating, 3.3 kg (7.3 lb).

1110-1343 mm span (43.7-52.9 in)

Covers light bars 40 to 52 inches long. The rails detach individually to change width.

Light bar not included

Two spotlight mounts, two adjustable mounts, two bases, four cover plates, two linkage mechanisms and two limb-riser lines are in the box. The bar is not.

Fits Bronco 2021-2025 (2.3 / 2.7 / 3.0)

Shipped to the US and Canada with duties and import fees already paid, so there is no customs bill when it lands (that is what DDP means). Delivery is typically 2-4 weeks.

Complete the Install

Adjustable Roof Spotlight Bracket 40-52"This item
Adjustable Roof Spotlight Bracket 40-52"
$448.00
Hood-Mounted Limb Riser Handle
Hood-Mounted Limb Riser Handle
$346.00
Bronco A-Pillar Dual Spotlight Bracket
Bronco A-Pillar Dual Spotlight Bracket
$452.00
Quick-Release Blind Spot Sand Plate Mirror
Quick-Release Blind Spot Sand Plate Mirror
$226.00
Bundle total · 4 items
$1,472.00
◆

Ships US & Canada

Duties included · delivery 2–4 weeks

◆

Fitment Guaranteed

Vehicle-specific, confirmed parts

◆

1-Year Warranty

Covered against defects for 1 year

◆

Easy Returns

14-day, uncrated & in packaging

In use

One mount, every way you run the truck.

A light bar mounted low throws glare back off the hood at night. These towers carry it above the windscreen header, clear of the glass and forward of the folded top. The bar in this frame is not part of the kit.

A light bar mounted low throws glare back off the hood at night. These towers carry it above the windscreen header, clear of the glass and forward of the folded top. The bar in this frame is not part of the kit.

Before / after

The same truck, ten minutes apart.

BeforeNothing above the windscreen. A light bar mounted low bounces glare off the hood back at you.
AfterThe bar sits up clear of the glass. Change bar width later without buying new mounts.

Nothing above the windscreen. A light bar mounted low bounces glare off the hood back at you.

The bar sits up clear of the glass. Change bar width later without buying new mounts.

Mechanism

Every claim, and the reason it is true.

Claim

Changing light-bar width is not a rebuild.

Mechanism

The rails detach individually across the 1110-1343 mm span, so a different bar means moving a rail rather than dismounting the bracket.

Claim

One set of roof points carries both a light bar and limb risers.

Mechanism

The limb-riser linkage is built into the same bracket, so the two systems share the factory mounting points instead of each needing their own.

Claim

The hood still opens with the lines fitted.

Mechanism

One press drops the limb-riser line tension and a second press re-tensions it. That is the line adjustment only — light-bar width is set separately with the sliding rails.

Detail

Where the cost went.

The sliding rails
The sliding railsThe sliding rails and the slots they travel in.
The mounting feet
The mounting feetThe light-bar mounting feet, in close-up.
The linkage
The linkageThe limb-riser linkage on the bracket, with its line anchor.

In the box

Everything, and what each piece is for.

Spotlight mounts x2, adjustable mounts x2On the roof rails · The pair the light bar bolts to; the adjustable half sets the span.
Spotlight bases x2, splice cover plates x4At the factory roof-rack points · Hold the assembly to the roof with no drilling.
Linkage mechanisms x2On the bracket · Hold and release the limb-riser line tension in one press.
Limb-riser lines x2, 1460-1480 mmHood corner to bracket · The lines themselves, included with this bracket. Length follows the bar span you order.
M6x30 x2, M6x18 x8, M5x14 x2, M5x10 x4, M5x10 button head x4In the box · All the fasteners needed to fit it.
Light bar, and the hood-end riser anchorNot included · You supply the bar. The hood anchor is our Hood-Mounted Limb Riser Handle, sold separately.
Standoffs 12x25 x2, 12x30 x2Between the bracket and its base · Set the standoff height so the bar clears the roof line.
M8 flange nuts x2, M8 lock nuts x2In the box · Lock the bracket bolts so they do not back off with vibration.
8.0 in
203 mm
Length
6.0 in
153 mm
Width
5.0 in
126 mm
Height
7.3 lb
3.3 kg
Net weight

Confirmed Fitment

  • Ford Bronco 2021–2025 2/4-Door
  • Ford Bronco Raptor 2022–2025 4-Door

How it compares

Adjustable span plus a limb riser that fixed brackets cannot match Fuku

Rival roof brackets are cut for one bar length and carry no limb riser. This one spans 1110-1343 mm and tensions limb-riser lines off the same deck. Neither includes the light bar.

Category of one

Fixed brackets cannot do both jobs

Most roof light-bar brackets are cut for a single bar length, and none integrate a limb riser. The closest alternatives are fixed-width steel brackets from DV8 Offroad, ZROADZ and Cali Raised LED - here is how they stack up.

FUKU
Fixed-length roof bracket
Adjustable 1110-1343 mm span (40-52 in bars)
✓
✕
Integrated limb riser, lines included
✓
✕
One-press limb-riser slack release
✓
✕
Machined 6061-T6 aluminium
✓
✕

◆ SUPPORT

Frequently asked questions

FITMENT

Every product lists the exact platforms it fits under “Fits” and in the Specs tab. Use Shop by Vehicle to filter to your rig.

Fitment is listed per product; most parts cover both 2- and 4-door and all trims unless noted otherwise.

Check the Fitment line on the product page for engine/trim coverage, or contact us with your year, model, and trim.

INSTALLATION

Most parts are no-drill and use factory mounting points; any exceptions are noted on the product page.

Basic hand tools cover most installs. Product pages and guides list exactly what you need.

Typical installs run 30–90 minutes depending on the part.

SHIPPING & RETURNS

Most orders dispatch within 2–4 business days. Oversized items (racks, ladders) may ship freight.

Yes — we ship across the US and Canada. All orders are DDP, so duties and import fees are covered at checkout.

Unused items in original packaging can be returned within 14 days of delivery. Change-of-mind returns pay return shipping and a 15% restocking fee; defective and warranty returns pay neither.

WARRANTY

A 1-year limited warranty covers defects in materials and workmanship under normal use.

Contact us with your order number and photos of the issue and we’ll take it from there.

Finish failure under normal use is covered for 1 year; normal wear is not.

End of summer sale

15% OFF

Use code SUMMER15 at checkout for 15% off.

SUMMER15

Applied at checkout when you enter the code. Ends 27 September. Cannot be combined with other discount codes.